Something you should know before installation

Home Forums [FAQ] Install teffo Something you should know before installation

This topic contains 0 replies, has 1 voice, and was last updated by  AquaMutant 11 months, 1 week ago.

  • Author
    Posts
  • #70

    AquaMutant
    Keymaster

    Something you should know before installation

    teffo is designed for aquarium. It suits the most of aquarium environment with the conditions as below :

    • teffo must be used in a well ventilated environment with humidity under 90% and temperature under 50⁰C/122⁰F. Direct contact with water is prohibited.
    • Connection through extension cable or connection through extension cable from teffo is prohibited.
    • The maximum output in combination with a teffo cannot exceed over 10A/125VAC/1250W or 8A/240VAC/1920W. If overloaded, teffo will shut down automatically. Please reduce the number of devices on the sockets immediately and check again the specification of your aquarium devices. If you have more than 4 devices, then you need a 2nd or more teffos.
    • You need to have a Wi-Fi router with working Internet.
    • You need to have a smart device with iOS 9.0 or Android 6.0 and later in order to use FishCare App.
    • Magnetic temperature probe and magnetic holder contain strong magnet, please use them carefully. Temperature sensor is a consumables, if app shows wrong value all the time, please replace a new temperature sensor immediately.

    Something you should know before installation

    Forum: https://blog.aquamutant.com/forums

    Website: https://aquamutant.com

You must be logged in to reply to this topic.